Illuminated House Number & Name Plaque

Illuminated House Number & Name Plaque

£200.00
300mm X 200mm standard plaque
Pinterest
Instagram
Facebook






Information
Please note that due to high demand we now have a waiting list for these bespoke products, and lead time is between six and eight weeks.  Please contact us for further information.

Made to order stainless steel house number plaques with your road name underneath, back lit with LEDs. These are bespoke, high quality products designed and assembled here in the UK. Your LED house number plaque will be laser cut from 304 grade 3mm thick brushed stainless steel and the LEDs are high quality, long lasting units. You can also select a powder coated finish in anthracite grey or black, which are long lasting architectural grade coatings. We will contact you with an image of your particular number & name combination to approve before production.

Standard size plaque of 200mm high * 300mm wide, with the numbers at 95mm high, and the text at approx 20mm high. These plaques are suitable for 1 or 2 digits and up to 15 letters of text on the bottom line (including spaces).The standard font that we use is Gill Sans, however if you would like to order a sign with a different font style or at a different size then please contact us with your requirements, and we can also create a bespoke quote for you if you have more digits or letters to be accommodated.

The plaque will be supplied with hidden fixing brackets for masonry or hardwood, which allow it to stand-off from the wall (34mm) and for the light to flood the area at the back of the number and lettering, creating a beautiful halo effect. If you would like to create a recess for these signs then please ask us about the recommended recess size.

LEDs provide the combined benefit of low energy consumption and long life. The LEDs we use on these numbers are suitable for outside use in all weather conditions.  Our LEDs come in Cool White (6000 Kelvin), Warm White (3000 Kelvin) or Blue. Your sign will be provided with a hard wire LED driver for wiring into the mains electricity and full fixings instructions, including an accurate drilling template.

Can illuminated house numbers or name plates be used with a dimmer? There are not enough LED modules on our illuminated numbers and small backlit plaques to produce an “efficiency curve” necessary to dim the modules successfully. This is because at 0.25 watts each they do not make up enough total wattage for the minimum load requirement of a dimmable driver which is 6 -7 watts.

OUR ILLUMINARED HOUSE NUMBERS REQUIRE INSTALLATION INTO THE MAINS ELECTRICITY SUPPLY AND WE WOULD RECOMMEND THAT THEY ARE INSTALLED BY A QUALIFIED ELECTRICIAN

PLEASE NOTE: Our LED Illuminated products can only be supplied to the UK and Ireland due to limitations on adapting these products for use with overseas electrical supplies.