Stainless Steel Back Lit House Numbers | Impact

A simple design solution with IP rated LED modules mounted on the back of these bold house numbers.
£44.50

Product information

Please note due to high demand we currently have a waiting list for these products and lead time is 10 working days. These numbers are individually hand finished, and built up to order in your colour and number combination by our dedicated team. 

Our contemporary Impact house numbers look stunning at night with back lit LEDs. These are high quality products designed and assembled here in the UK. The numbers are laser cut from 304 grade 3mm thick brushed stainless steel and the LEDs are high quality, long lasting units.

The numbers come with hidden fixings which allow them to stand-off from the wall and for the light to flood the area at the back of the number. LEDs provide the combined benefit of low energy consumption and long life. The LEDs we use on these numbers are suitable for outside use in all weather conditions.  Our LEDs come in Cool White (6000 Kelvin), Warm White (3000 Kelvin) or Blue.  Please use the drop down menu to order your LED colour or contact us if you require anything different. 


You will need an LED driver to run your back lit number, please select the type you require from the drop down list above. There are two types of driver. A simple "plug in" driver which will allow your electrician to run your illuminated house number cable back into your house and plug into the nearest standard three pin plug inside. Alternatively, a "hard wire" driver which allows your electrician to hard wire your house number into your house wiring - this is an ideal solution if your house numbers are being added to a new build, an extension or a gate post or pillar.

Can illuminated house numbers or name plates be used with a dimmer? There are not enough LED modules on our illuminated numbers and small backlit plaques to produce an “efficiency curve” necessary to dim the modules successfully. This is because at 0.25 watts each they do not make up enough total wattage for the minimum load requirement of a dimmable driver which is 6 -7 watts.

OUR ILLUMINARED HOUSE NUMBERS REQUIRE INSTALLATION INTO THE MAINS ELECTRICITY SUPPLY AND WE WOULD RECOMMEND THAT THEY ARE INSTALLED BY A QUALIFIED ELECTRICIAN

WE RECOMMEND OUR ILLUMNATED NUMBER PLATES IF MORE THAN 2 OR 3 NUMBERS ARE REQUIRED FOR EASE OF INSTALLATION.


PLEASE NOTE: Our LED Illuminated products can only be supplied to the UK and Ireland due to limitations on adapting these products for use with overseas electrical supplies.