Made to order LED house number plaques in Gill Sans font, with custom colour backing plates to make the LEDs glow with colour! These are bespoke, high quality products designed and assembled here in the UK.
Please note due to high demand we have a waiting list for these products, and lead time for stainless steel or powder coated steel is between 4 & 6 weeks, acrylic signs have a 2 week lead time. You will be advised on a delivery date when you place your order.
SIZES
one or two digits - 150mm high * 200mm wide
three digits - 150mm high * 250mm wide
Your house number plaque will be laser cut from 304 grade 3mm thick brushed stainless steel or 3mm acrylic, with a 5mm coloured frosted acrylic backing plate, and high quality long lasting LED units. You can also select a powder coating for an architectural grade finish in anthracite grey or black which is applied over the stainless steel. The acrylic comes in a choice of matt black or matt charcoal grey.
The front surface material and colour options are as follows:
Black Acrylic (matt)
Charcoal Grey Acrylic (matt)
Stainless Steel (304 grade, brushed, silver in colour)
Black powder coating matt (over 304 grade stainless steel)
Anthracite grey powder coating matt (over 304 grade stainless steel)
The frosted backing material options are as follows:
Aqua Blue
Orange
Green
Yellow
Pale Blue
The two blue colours look very similar with the lights on, the Aqua blue has a stronger tone when the lights are off, please see light OFF images to compare.
The sample images of the number 2 are all of a 7016 Anthracite Grey powder coated sign.
These prices include an IP rated outdoor hardwire driver and courier delivery to the UK.
The LED driver is a separate unit to the sign which will need to be installed into the mains electrics to power the sign, it is NOT on the back of the sign itself, 2m of low voltage cable is included in your order to allow flexibility to reach the mains.
We will contact you with an image of your particular number combination to approve before production.
The plaque will be supplied with hidden fixings for wood or masonry, which allow it to stand-off from the wall and for the light to flood the area at the back of the number. Your plaque will be delivered with complete instructions for installation into the mains electricity supply. We recommend that they are installed by a qualified electrician.
LEDs provide the combined benefit of low energy consumption and long life. The LEDs we use on these numbers are suitable for outside use in all weather conditions. Our LEDs come in Cool White (6000 Kelvin) or Warm White (3000 Kelvin). On this product the colour of the acrylic layer interacts with the light and so the kelvin is not accurate, we pair the frosted colour with the complimentary light colour e.g. Orange is paired with the warm white and Aqua Blue is paired with the cool light etc. If you are wishing to match the LEDs exactly to other external signage we recommend our standard product with no colour to the frosted layer, then the warm white light will be a true 3000 Kelvin.
Can illuminated house numbers or name plates be used with a dimmer? There are not enough LED modules on our illuminated numbers and small backlit plaques to produce an efficiency curve necessary to dim the modules successfully. This is because at 0.25 watts each they do not make up enough total wattage for the minimum load requirement of a dimmable driver which is 6 -7 watts.
OUR ILLUMINARED HOUSE NUMBERS REQUIRE INSTALLATION INTO THE MAINS ELECTRICITY SUPPLY AND WE WOULD RECOMMEND THAT THEY ARE INSTALLED BY A QUALIFIED ELECTRICIAN
PLEASE NOTE: Our LED Illuminated products can only be supplied to the UK and Ireland due to limitations on adapting these products for use with overseas electrical supplies.
